Work on the East African Crude Oil Pipeline (EACOP) project. Tanzania. In the structure of the customer. Supervision of works on disciplines: electrical equipment, instrumentation, telecom. Review of project documentation, issuing remarks and comments. Interaction with design institutes. Interaction with vendors. Participation in meetings with contractors. Interaction with related disciplines. Control of project implementation timelines. Development of design solutions. Monitoring of safety compliance, in accordance with project requirements and international standards.

Work at Sakhalin- 2 project for Onshore, Offshore, LNG Plant and Pipeline facilities. Combined responsibilities. Participation in the campaign for the transfer of materials to the Company's balance sheet, counselling and preparation of a package of quality documents for materials and equipment of E&I disciplines.

Work in the Directorate of Project and Investment Activities within the client's structure. Modernisation and technical upgrade of Sakhalin-2 project facilities. Including offshore, onshore facilities, LNG plant and trunk pipeline. Supervision of MoC electrical installation works. Supervision of works during planned shutdown period (July 2024). Review of design documentation for electrical, instrumentation and control, communication networks, OPS. Development and implementation of design solutions. Interaction with related disciplines. Participation in daily meetings with the contractor. Work with the Electronic System of Orders and Permits. Control over compliance with safety requirements in accordance with the project requirements.

Work at 3GP Tengiz Project (third generation oil refinery plant) For Tengizchevronoil. Technical support and guidance to the project electrical commissioning team members, performing pre-commissioning and commissioning activities for HV, MV, LV equipment. Coordination with various project disciplines teams, including construction, vendors and maintenance teams. Organization, planning and risk assessment for crew activities in accordance with CTP (commissioning test procedure), issuing of PTW, organization of EX Inspections. Participation in daily meetings and kick-off meetings, client meetings. Problem-solving: Identify and resolve technical issues and problems that arise during the project. Following safety requirement as per project and international standards.

Work at Arctic LNG-2 Project (onshore facilities construction site, Gydan peninsula). For NOVATEK. Technical and administrative supervision and guidance of electrical installation and commissioning subcontractors as EPC project contractor representative. Such as electrical installation works for HV, MV and LV equipment, assembling of transformer substations, and control building, commissioning, testing and closing punch items from customer (Arctic LNG-2). Performance control of subcontractors work scopes for compliance with the project procedures, methods, plans, and HSE requirements during the work. Verification of work scopes survey as per BoQ, and BoM. Cost clarification and confirmation. Interaction with various project disciplines teams such as vendors, field engineering, project planning team, electrical laboratory and maintenance. Participation at walkdowns and meetings with client (Arctic LNG-2). Quality verification control in conjunction with the QC department. Ensure the project adheres to quality standards and regulations. Supervision of the safety of related work. Problem-solving: Identify and resolve technical issues and problems that arise during the project. Preparation of orders and solutions for the construction site (Site Instruction) to perform work that was not part of the main scope of subcontractors (elimination of inconsistencies to the project, modifications).

Work at EPC project of Novotroitsk ASU (Air separation unit). For Linde Gas. Management of construction and commissioning project scopes for Electrical & Instrumentation disciplines. Control, organization and coordination of subcontractor activities in accordance with project schedule, design documentation, specifications, design guidelines, project requirements and standards. Daily risk assessment for planning activities. Performance control of subcontractors work scopes for compliance with the project procedures, methods, plans, and HSE requirements during the work. Verification of work scopes survey as per BoQ, and BoM. Cost clarification and confirmation. Quality verification control in conjunction with the QC department. Ensure the project adheres to quality standards and regulations. Participation in daily meetings, kick-off meetings and client meetings and client walkdowns. Preparation of orders and solutions for the construction site (Site Instruction) to perform work that was not part of the main scope of subcontractors (elimination of inconsistencies to the project, modifications). Coordinate with various teams, including project design office, manufacturers, vendors, construction, commissioning and maintenance teams, to ensure project goals are met. Successful commissioning and start-up of heavy Main Air Compressor (12,5 MW).

Work on the international project of modernization Omsk Oil Refinery Plant, as CM contractor of Gazprom Neft. Construction of a complex for deep oil refining (KGPN project). Including HCU (hydrocracking unit) and SRU (sulfur recovery unit). Technical and administrative supervision and guidance of electrical installation and commissioning subcontractors as CM project contractor representative. Such as electrical installation works for HV, MV and LV equipment, assembling of transformer substations, and control building, commissioning, testing and closing punch items from customer (Gazprom Neft). Performance control of subcontractors work scopes for compliance with the project procedures, methods, plans, and HSE requirements during the work. Verification of work scopes survey as per BoQ, and BoM. Cost clarification and confirmation. Interaction with various project disciplines teams such as vendors, field engineering, project planning team, electrical laboratory and maintenance. Participation at walkdowns and meetings with client (Gazprom Neft). Quality verification control in conjunction with the QC department. Ensure the project adheres to quality standards and regulations. Supervision of the safety of related work. Problem-solving: Identify and resolve technical issues and problems that arise during the project. Preparation of orders and solutions for the construction site (Site Instruction) to perform work that was not part of the main scope of subcontractors (elimination of inconsistencies to the project, modifications).

Work at the project of modernization of the Moscow oil refinery plant. Construction of a combined oil refining unit (CORU). Organization of motor solo-run tests of electric motors 6kV, 0.4 kV without load. Preparation and delivering of mechanical completion documentation (MCD) to the customer. Coordinate with various teams, including vendors, construction, commissioning and maintenance teams, to ensure project goals are met. Performance control of subcontractors work scopes for compliance with the project procedures, methods, plans, and HSE requirements during the work. At the end of the contract, MRST was done successfully a total of over 400 units.

Work on the international project for the development of the South Tambey gas condensate field (UTGKM), construction of the 3rd technological line for gas purification, separation and liquefaction, the Yamal LNG plant in Sabetta. Performance control of subcontractors work scopes for compliance with the project procedures, methods, plans, and HSE requirements during the work. Verification of work scopes survey as per BoQ, and BoM. Cost clarification and confirmation. Interaction with various project disciplines teams such as vendors, field engineering, project planning team, electrical laboratory and maintenance. Participation at walkdowns and meetings with client (Yamal LNG). Quality verification control in conjunction with the QC department. Ensure the project adheres to quality standards and regulations. Supervision of the safety of related work. Problem-solving: Identify and resolve technical issues and problems that arise during the project. Preparation of orders and solutions for the construction site (Site Instruction) to perform work that was not part of the main scope of subcontractors (elimination of inconsistencies to the project, modifications). At the end of the contract, 3 Trains of the Yamal LNG plant were successfully started-up.

Work on an international project for development of the South Tambey gas condensate field (YTGKM), construction of the Yamal LNG plant (LNG storage tanks) in Sabetta. Performance control of subcontractors work scopes for compliance with the project procedures, methods, plans, and HSE requirements during the work. Verification of work scopes survey as per BoQ, and BoM. Cost clarification and confirmation. Interaction with various project disciplines teams such as vendors, field engineering, project planning team, electrical laboratory and maintenance. Participation at walkdowns and meetings with client (Yamal LNG). Quality verification control in conjunction with the QC department. Ensure the project adheres to quality standards and regulations. Supervision of the safety of related work. Problem-solving: Identify and resolve technical issues and problems that arise during the project. Preparation of orders and solutions for the construction site (Site Instruction) to perform work that was not part of the main scope of subcontractors (elimination of inconsistencies to the project, modifications). Approval of the permitions for commissioning works. Control over the safety during the commissioning works. At the end of the contract, all 4 LNG tanks were successfully handovered to the customer and successfully accepted the product.

Implementation of commissioning at the facilities for the production, processing, transportation of Gazprom's gas (a linear part of the gas main, crane units, gas distribution stations (GDS), compressor stations (CS), industrial facilities). Verification of the results and quality of construction and installation works, verification of operation and commissioning of installed equipment and systems in conjunction with representatives of general contracting organizations and operating services of JSC Gazprom. Interaction with organizations that carry out construction and installation works (SMR), design institutes and other contract organizations, conduct business correspondence, issue comments on installation and maintenance of installation works, draft complaints and certificates of equipment verification. Interaction with internal services of JSC Gazprom: linear operational service (LES), service of automated control systems, services serving the shops of compressor stations, gas distribution stations, industrial facilities and the linear part of the main gas pipeline. Experience in such facilities as: the main gas pipeline Yamal- Europe (Bovanenkovo-Ukhta 1st and 2nd line); gas pipeline - the outlet of Kurgan-Yurgamysh, with a diversion to Kurtamish.

Management of control cabinets assembling plant: designing of control cabinets (CC), control panels (CP), control boards (CB), distribution boards (DB): management of a team of electricians who perform installation of CC, CP, CB, DB, laying cable routes, advising on controversial issues; programming of intelligent relays Zelio Logic manufactured by Schneider Electric; programming of GSM modules SRMOD02 manufactured by Schneider Electric; hand-test debugging of the algorithms of complex CC, CP, CB, DB.

Management and management competencies, Project Management. Organization and management of the project life cycle.

Institute of Transport Equipment and Structures, Electrical Transport

NOSTROY, Chief Project Engineer

Edil-oral.kz, IEC 60079-10, 14, 17, 19 standards.

Horizon LLP, EX-equipment Inspector

OPITO

SEFtec

Training Center of Marine Rescue Service. (OPITO provider)

Training Center of Marine Rescue Service (OPITO provider).

“National Association of Self-Regulatory Organizations Based on the Membership of Construction Persons”, Organization of construction, reconstruction, overhaul of capital construction projects.

TechnipFMC, Pulse for the Workforce

TechnipFMC, Behaviour Based Safety

Entrepose Projets, Raising awareness on behaviour relating to daily risk taking